Welcome to Slopefun! We know Slope flying is alot of fun - hence the name Slope Fun!

On this site you will find information about radio controlled slope and electric planes, especially the EPP (Expanded Polypopylene) combat flying wings, their construction, flying and of course you can even buy one!

R60 DS Extreme

Specifications
Wing Span: 1500mm (60")
Length: 700mm
Wing Area: 2800cm2 (434sq.in)
Aspect Ratio: 8.3
Kit Contents
1 Pre Cut EPP Wing Set
1 Pre Cut Fuselage
1 PowerBilt™ Carbon Fuse Spar
2 Basswood Drag Spars
2 Balsa Elevons
1 Balsa Fin
2 Elevon Control Horns
2 Elevon Control Rods (with clevis's)
2 E/Z Link Connectors

Kit Features
4 PowerBilt™ Carbon Spars
2 Machined Ali. Wing Spar Joiners
3Carbon String centre

Materials Required (not included in kit)
Gorilla Glue or Polyurethane Glue
30min Epoxy (or 12hr)
EPP Foam-Safe Cyanoacrylate (CA) Glue
3M Fiber Strapping Tape (or an equivalent)
3M77 Spray Adhesive
Masking Tape
Glad Wrap/Shrink Wrap
80 and 120 Grit Sandpaper (recommended)
Covering Material
2x 300mm Servo Extension Leads

Radio Gear Required (recommended)
2 Metal Geared Servos: Blue Bird BMS380MAX or Hitec HS85MG
Receiver: JR R700FM or JR R770PCM
Battery: AA or AAA 4 cell 4.8v 600mAh+ (2 cells wide x 2 cells long)
Transmitter: Any transmitter with ‘Elevon Mixing’ and ‘Dual Rates

EPP combat flying wings are virtually indestructable, which means you can actually learn how to fly them without worrying too much about crashing, as a crash will only hurt your pride (or your head if you fly into yourself). This is a big advantage over the traditional balsa and/or fibreglass carbon gliders, which become unflyable in the hands of a beginner after a failed fight against gravity!.

So have a look around the site - hopefully you will find some helpful information, some nice photos, and maybe even a glider to buy! Most of all, have fun - that's what it is all about!